A 128 tooth gear for robotics design, made from 6061-T6 aluminum, with a 6.35mm thickness and a 14mm hole diameter.

• Step File

Specifications:

• Material: 6061-T6 Aluminum
• Number of teeth: 13
• Step File

Specifications:

• Material: 6061-T6 Aluminum
• Number of teeth: 26
• Step File

Specifications:

• Material: Steel
• Number of teeth: 30
• Set of 2 for 1-1 drives
• Step File

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 6.35mm
• Hole Diameter: 14mm
• Step File

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 6.35mm
• Hole Diameter: 14mm
• Number of teeth: 64
• Step File

The Studica Robotics Gear Pack includes 32, 64 and 128 tooth gears, shaft hubs and socket head cap screws, ideal for your robotics designs.

Gear 16T is designed for transmitting motion from a motor to another gear or shaft.  You can use a headless screw M3x5 to attach it.

Gear 48T is designed for transmitting motion from a motor to a wheel or shaft. Usually it is used with shaft connector or flange bearing 4*8*3.

Features:

• 48 teeth
• With 8mm diameter hub compatible with shaft connector or bearings

Gear 80T is designed for transmitting motion from a motor to a wheel or shaft. Usually it is used with shaft connector or flange bearing 4*8*3.

Plastic Gear 56T is a kind of gear drives. It can mesh with other gears to drive various parts. The gear has two bosses for positioning Makeblock parts. Gears also can be overlaid with each other through the bosses in order to make parts connected more stably.

Plastic Gear 72T is a kind of gear drives. It can be matched with other gears to drive various parts. The gear has two bosses for positioning Makeblock parts. Gears also can be overlaid with each other through the bosses in order to make parts connected more stably.

Plastic Gear 8T is a kind of gear drives. It usually works with motor shaft as a drive mechanism. There is interference fit between Plastic Gear 8T and motor shaft, therefore the gear should be pressed into the motor shaft with effort while assembling, and has to be disassembled by nut wrench according to the building samples. If the gear has to bear great load and be connected with motor shaft tightly, you need to use glue such as 502 glue.

Includes,

• 2 - 13 Tooth Bevel Gear (2 pack)  76223-2
• 2 - 26 Tooth Bevel Gear (2 pack)  76224-2
• 4 - 30 Tooth Bevel Gear (2 pack)  76219-2
• 2 - Rack & Pinion  76170
• 2 - 6mm Shaft Hub (4 pack)  76284-4
• 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 12mm
• Step File

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 6mm
• Step File

The Studica 30T Servo 25T Spline Gear is used with the Studica Multi-Mode Smart Servo or Studica Multi-Mode Smart Servo 200.