Close
Menu
Main Categories
    (0) Quote
    You have no items in your shopping cart.
    (0) Items
    You have no items in your shopping cart.
    Menu
    Shopping cart
    Filters
    Preferences
    Search
    PrevSeeed Studio Grove - Vibrat...
    NextLinear Servo RC Actuator 14...

    Linear Servo RC Actuator 140-200

    Be the first to review this product

    The Studica Linear Servo RC Actuator 140-200 is a new Servo motor which has a stroke of 140mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    MFR Part #: 75014
    $69.99
    Availability: In stock

    Specifications:

    • Stroke: 140mm
    • Length: 208mm
    • Weight: 96g
    • Extended length: 348mm
    • Gear Ratio: 150:1
    • Speed (no load): 6mm/s
    • Max Force: 190N
    • Stall Torque: 325N
    • Wire length: 340mm
    • Connector: 2.54mm Dupont 3-Pin Female
    • Control Signal: PWM
    • Frequency: 50 HZ
    • Voltage: 6V
    • Data Sheet
    • Step files
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Also Purchased

    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $23.99
    (28 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Hex Key Metric 7 Piece Set (1.5, 2, 2.5, 3, 4, 5, 6)

    Hex Key Metric 7 Piece Set (1.5, 2, 2.5, 3, 4, 5, 6)

    #70144-7
    $9.99
    (34 In stock)

    Specifications:

    • 7 color pcs
    • 1.5, 2, 2.5, 3, 4, 5, 6
    • Non-slip handle
    • ball-end and straight-end
    • S2 Hardness
    • Non-corrosive
    • Weight: 0.118kg
    Picture of JST-GH to 4 Pin Dupont Cable (4 pack)

    JST-GH to 4 Pin Dupont Cable (4 pack)

    #70177
    $8.99
    (25 In stock)

    The JST-GH to 4 Pin Dupont Cable can be used for the VMX Controller.

    Picture of Anderson PowerPole 45 to JST VH Cable

    Anderson PowerPole 45 to JST VH Cable

    #70178
    $3.99
    (25 In stock)
    Picture of XT30 (MH-FC) to Tamiya (MH-FC) Cable

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $3.99
    (23 In stock)
    Picture of USB Cable, Type A to Micro-B, Black, 1M

    USB Cable, Type A to Micro-B, Black, 1M

    #70187
    $3.99
    (25 In stock)
    Picture of Clamping Shaft Hub

    Clamping Shaft Hub

    #76281
    $7.99
    (25 In stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 
    Picture of Light Weight Shaft Hub - 2 Pack

    Light Weight Shaft Hub - 2 Pack

    #76282-2
    $7.99
    (50 In stock)

    Studica Robotics Light Weight Shaft Hubs are used with the 6mm D shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm D Shaft ID
    • M3 tapped hole pattern for connecting to structure
    • Step File 
    Picture of Enhanced Wheel Hub Kit

    Enhanced Wheel Hub Kit

    #76291
    $14.99
    (In stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File
    Picture of 6mm D-Shape Collar Clamp

    6mm D-Shape Collar Clamp

    #76320
    $4.99
    (50 In stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.

     

    Step File

    Specifications:

    • Stroke: 140mm
    • Length: 208mm
    • Weight: 96g
    • Extended length: 348mm
    • Gear Ratio: 150:1
    • Speed (no load): 6mm/s
    • Max Force: 190N
    • Stall Torque: 325N
    • Wire length: 340mm
    • Connector: 2.54mm Dupont 3-Pin Female
    • Control Signal: PWM
    • Frequency: 50 HZ
    • Voltage: 6V
    • Data Sheet
    • Step files
    Customers who bought this item also bought
    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $23.99
    (28 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Picture of I2C to I2C 3pin female to female cable, 22WAG

    I2C to I2C 3pin female to female cable, 22WAG

    #71012
    $10.00
    (10 In stock)
    Hex Key Metric 7 Piece Set (1.5, 2, 2.5, 3, 4, 5, 6)

    Hex Key Metric 7 Piece Set (1.5, 2, 2.5, 3, 4, 5, 6)

    #70144-7
    $9.99
    (34 In stock)

    Specifications:

    • 7 color pcs
    • 1.5, 2, 2.5, 3, 4, 5, 6
    • Non-slip handle
    • ball-end and straight-end
    • S2 Hardness
    • Non-corrosive
    • Weight: 0.118kg
    Picture of JST-GH to 4 Pin Dupont Cable (4 pack)

    JST-GH to 4 Pin Dupont Cable (4 pack)

    #70177
    $8.99
    (25 In stock)

    The JST-GH to 4 Pin Dupont Cable can be used for the VMX Controller.

    Picture of Anderson PowerPole 45 to JST VH Cable

    Anderson PowerPole 45 to JST VH Cable

    #70178
    $3.99
    (25 In stock)
    Picture of XT30 (MH-FC) to Tamiya (MH-FC) Cable

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $3.99
    (23 In stock)
    Picture of USB Cable, Type A to Micro-B, Black, 1M

    USB Cable, Type A to Micro-B, Black, 1M

    #70187
    $3.99
    (25 In stock)
    Picture of Clamping Shaft Hub

    Clamping Shaft Hub

    #76281
    $7.99
    (25 In stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 
    Picture of Light Weight Shaft Hub - 2 Pack

    Light Weight Shaft Hub - 2 Pack

    #76282-2
    $7.99
    (50 In stock)

    Studica Robotics Light Weight Shaft Hubs are used with the 6mm D shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm D Shaft ID
    • M3 tapped hole pattern for connecting to structure
    • Step File 
    Related products
    Picture of Linear Servo RC Actuator 140-50

    Linear Servo RC Actuator 140-50

    #75013
    $69.99
    (In stock)

    The Studica Linear Servo RC Actuator 140-50 is a new Servo motor which has a stroke of 140mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Picture of Linear Servo RC Actuator 50-200

    Linear Servo RC Actuator 50-200

    #75011
    $64.99
    (In stock)

    The Studica Linear Servo RC Actuator 50-200 is a new Servo motor which has a stroke of 50mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Picture of Linear Servo RC Actuator 50-50

    Linear Servo RC Actuator 50-50

    #75010
    $64.99
    (In stock)

    The Studica Linear Servo RC Actuator 50-50 is a new Servo motor which has a stroke of 50mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $23.99
    (28 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Picture of Multi-Mode Smart Servo 200 - FAST

    Multi-Mode Smart Servo 200 - FAST

    #75007
    $24.99
    (In stock)

    The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Information
    Customer service
    My account
    Contact Info
    • Studica
    • 1-716-731-9070 / 1-888-561-7521
    Copyright © 2023 Studica. All rights reserved.